Maserati Ghibli Owner's Manual page 151

NOTE:
In "SYNC" mode, this control will also
automatically and simultaneously
adjust the passenger temperature.
4. Passenger temperature control
Provides the passenger with
independent temperature control.
Touch the soft-key for cooler
temperature. Touch the
for warmer temperature. The
passenger's temperature setting will
be displayed on the upper status bar.
The temperature can also be adjusted
by touching and sliding the bar
towards soft-key , to increase
temperature, or towards soft-key
to decrease it.
During this phase, the corresponding
temperature will be displayed on the
upper status bar as for the driver's
side.
You can increase or decrease the
temperature using the rocker switch
on the climate control panel.
NOTE:
Pressing the 4 button/soft-key while in
"SYNC" mode will automatically exit
"SYNC".
5. Recirculation
Press to change the current setting,
the LED indicator on the button and
the relevant soft-key illuminates to
indicate which recirculation function
is activated. For further details,
see paragraph "Climate Control
Functions" in this chapter.
6. Blower control
soft-key
Blower control is used to adjust the
amount of air forced through the
climate system. Eight levels of blower
speed can be selected. Adjusting the
blower will cause automatic mode to
switch to manual.
On the climate control panel, push the
rocker switch up to increase blower
speed. Push the rocker switch down to
decrease blower speed. Pushing down
the rocker switch when set blower is at
the first speed, causes the A/C system
shutdown (OFF condition).
On the MIA display, touch the number
corresponding to the blower speed
you want to set.
When the MIA is displayed in any
category other than "Climate", the
blower speed is indicated by the
number in the "Comfort" soft key of
the main category bar.
7 - 8. AUTO
This function automatically controls
the interior temperature by adjusting
Dashboard Instruments and Controls
the air flow rate and the air
distribution respectively on the driver
and on the passenger zone. Press
"AUTO" to switch the ATC between
manual and automatic mode. The LED
on the button and the "AUTO" soft-
key illuminates when the automatic
function is activated. See "Automatic
Temperature Control (ATC)" in this
chapter for more information.
9. MAX defrosting/demisting
Press the button or the MIA
soft-key to switch the airflow setting
to the windshield and the front side
windows to get quick defrosting/
defogging. The LED on the button
and the MIA soft-key illuminates
when this function is activated.
Operating this function will cause
the ATC to switch into manual mode:
so the "AUTO" LED on the button
and the MIA soft-key will turn off.
With engine off, the blower will run
at minimum speed (level 1) and can
be increased manually: with engine
on, the blower speed will gradually
increase to the higher speed (level 8).
MAX defrosting/demisting shall also
involve REAR defrosting/demisting
function. If this function is turned off
the climate system will return to the
previous setting, switching on the A/C
4
149