Section 2: Finding Your Model Number; Section 3: Calling Customer Support - MTD YARD MACHINES 587 Series Operator's Manual

SECTION 2: FINDING YOUR MODEL NUMBER

This Operator's Manual is an important part of your new edger. It will help you assemble, prepare and
maintain your edger. Please read and understand what it says.
Before you start to prepare your edger for its first use, please locate the model plate and copy the information
from it in this Operators Manual. The information on the model plate is very important if you need help from
your dealer or the MTD customer support department.
• Every edger has a model plate. You can locate it by standing in the operating position behind the unit
and looking down at the rear of the frame.
• The model plate will look like Figure 2
XXX-X-XXX-X-XXX XXXXXXXXXXX

SECTION 3: CALLING CUSTOMER SUPPORT

If you are having difficulty assembling this product or if you have any question regarding the controls,
operation or maintenance of this unit, please call the Customer Support Department. You can reach them by
calling:
Before you call, make sure that you have your model and serial numbers ready. By having the model and
serial numbers ready, you help the Customer Support Representative give you faster service. To find your
units model and serial number, see SECTION 2: FINDING YOUR MODEL NUMBER.
Copy the model number here:
MTD PRODUCTS INC
CLEVELAND, OHIO 44136
1-800-800-7310
This is where your model number will be.
This is where your serial number will be.
Copy the serial number here:
Figure 2
4