Table of Contents
Advertisement
USING YOUR OVEN (CONTINUED)
Displaying the oven centre and set temperature (other
than pyrolytic clean function)
1.
Press the
and the "Oven centre temperature" is displayed.
2.
Press the
the "Oven set temperature" is displayed.
3.
Alternatively, the
left ( ) or right ( ) for 1 second and the "Oven set
temperature" is displayed.
NOTE: This temperature is displayed for 5 seconds.
Light operation
1.
At any time, the oven lamp can be switched on or off
by pressing and holding the
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened.
1.
Switch the
2.
Press and hold the
time until the word 'SAFE' is displayed and a double
beep sounds. The word safe will be replaced by a
padlock symbol on the display after 5 seconds.
De-activating the child-proof lock
1.
Press and hold the
time until a double beep sounds. This will commence
to unlock the door and after 5 seconds the oven is
ready for use.
Switching the clock display ON and OFF
When the oven is off, the clock display can be switched
on and off.
1.
Press together
switch off the display.
2.
Press together
switch the clock display on again.
When the oven is off and the display is set to the 'off'
state, pressing the
day for 5 seconds then turn off the display.
NOTE: If a timer mode is set or the oven is operating, then
it is not possible to switch the display off.
Safety cut-out feature
The oven will automatically switch "Off" if the
temperature is not adjusted or the appliance is left
operating for a period of time. The oven switches itself
off after:
1.
12.5 hours when the temperature is set between 30°C
and 120°C.
2.
8.5 hours when the temperature is set between 120°C
and 200°C.
3.
5.5 hours when the temperature is set between
200°C and 250°C.
4.
3.0 hours when the temperature is set at 250°C.
18
USING YOUR OVEN
button when the oven is operating
button again within 5 seconds and
selector can be toggled
button for 5 seconds.
selector to "Off".
and
buttons at the same
and
buttons at the same
and
symbols for 2 seconds to
and
symbols for 2 seconds to
or
buttons will display the time of
DEMO mode
The oven can be set to operate in a demo (e.g. in a retail
store) mode. In this mode the oven does not actually heat
if the oven has been inadvertently supplied in this mode.
The following instructions demonstrate how to exit
this mode.
1.
Ensure the oven is "Off". Press and hold the
until a beep sounds. The 'Demo' text on the display
will flash.
2.
While holding the
button, turn the
to the first oven function until another beep is heard.
3.
Then turn the
4.
Release the
button.
5.
Toggle and hold the
) until 3 beeps sound. The 'Demo' text will no longer
be displayed and the oven will function normally. If
the 'Demo' text is still displayed repeat the above
procedure.
Operating the Programmable Controller
(WVE617 & WVEP618)
General features
The oven is equipped with a programmable controller
that can be used to turn the oven on and off
automatically. The
the oven off after a set amount of time. The 'End time'
function is used to set the time of day you want the
cooking cycle to finish. A "Delayed start" is possible by
combining the
and
the oven on and off at a specific time during
the day.
Setting the time of day (after electrical connection):
1.
After the appliance has been electrically connected,
the "Set clock" symbol
2.
To set the time of day, press
the "Set clock" symbol
3.
After 5 seconds from the last change, the "Timer
arrow" symbol
will disappear confirming the time
has been set.
NOTE: The clock has a 24-hour display.
button
selector
selector to the 'Off' position.
selector to the right (
function automatically turns
features to switch
will flash on the display.
or
symbols while
is flashing.
Advertisement
Table of Contents
