Table of Contents
Advertisement
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Engine Control Module >
Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >
ENG094 > Jan > 11 > Campaign SA075 - ECM Update For MIL ON/DTC P0017 > Page 1240
7. When the GDS tool reports that the ECM upgrade has been successfully completed, click OK,
turn OFF the ignition key, and wait at least 10 seconds before attempting to start the engine.
8. Check for Diagnostic Trouble Codes using the GDS and erase any DTCs stored such as EPS,
ESC, and TPMS. Due to CAN BUS multiple DTCs may be set during reprogramming.
9. Start the engine to confirm proper operation of the vehicle.
AFFECTED PRODUCTION RANGE: 2011 Model Year Sorento (XM) with 3.5L produced prior to
September 20, 2010.
SERVICE ACTION WARRANTY CLAIM INFORMATION
STANDARD WARRANTY CLAIM INFORMATION:
Use this information only to file a warranty claim for vehicles for which:
1. A customer complains of the same concern.
2. The VIN does not appear on the Affected Vehicles List for Service Action SA075
3. The vehicle model year and production date range are as identified in this bulletin.
Advertisement
Table of Contents
