Monitoring The Audio With Headphones - Canon EOS C300 Instruction Manual

Recording Audio
Activating the Microphone's Attenuator
If the audio level is too high and the sound sounds distorted, activate the
microphone attenuator (20 dB).
84
1 Open the [MIC Att.] submenu.
[¡ Audio Setup] > [Audio Input] > [MIC Att.]
2 Select [On] and then press SET.

Monitoring the Audio with Headphones

Connect headphones* to the × (headphone) terminal to monitor the
recorded audio. Press the HEADPHONE +/- buttons to adjust the volume.
* For PAL recordings, use commercially available headphones with a cable no longer
than 3 m.
NOTES
• You can also adjust the headphone volume with the [¡ Audio Setup]
> [Audio Output] > [Headphone Volume] setting.
[¡ Audio Setup]
Audio Input]
[
[ MIC Att.]
[Off]
× (headphone)
terminal
HEADPHONE +/-
buttons