Canon EOS C300 Instruction Manual page 140

Taking Photos
IMPORTANT
• Observe the following precautions while the SD card access indicator is flashing. Failure to do so may result in
permanent data loss.
140
- Do not disconnect the power source or turn off the camcorder.
- Do not remove the SD card.
NOTES
• If the LOCK switch on the SD card is set to prevent writing, you will not be able to record a photo. Change the
position of the LOCK switch in advance.
• Even if [Other Functions] > [Custom Function] > [Scan Reverse Rec] is set to a setting other than [Off],
photos will not be inverted.