Onscreen Displays - Canon EOS C300 Instruction Manual

• Playback will start from the clip selected and continue until the end of the last clip in the index screen. When
the last frame of the last clip is reached, playback will be paused.
• Press the Ò button again or press SET to pause/resume the playback.
• Press the Ñ button to stop the playback and return to the index screen.
IMPORTANT
• Observe the following precautions while the CF2 or CF3 access indicator is illuminated in red. Failure to do
so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the cover of the CF card slot being accessed.
NOTES
• You may notice brief stops in video or audio playback between clips.

Onscreen Displays

1
2
3
4
5
6
1 Remaining battery time (A 53)
2 Joystick guide (A 116)
1
3 Shutter speed (A 58)
4 # Aperture value 1
1
5 ISO Speed/Gain (A 61)
6 Recording date and time
7 Playback operation
8 Selected CF card
9 Relay recording
10 $ mark/% mark (A 91, 120)
1
Appears when [£ LCD/VF Setup] > [Metadata Display] > [Camera Data] is set to [On].
2
Appears when [£ LCD/VF Setup] > [Metadata Display] > [Date/Time] is set to [On].
7
(A 64)
2
8 9 10
11 Time code (A 73)
12 Clip number / Total number of clips
13 Bit rate and resolution (A 55)
14 Frame rate (A 55)
15 Embedded custom picture file (A 101)
16 Output displays (A 130)
17 User bit (A 76)
18 Audio output channel (A 131)
19 Audio level meter
Playback
11
12
13
14
15
16
17
18
19
115