Mn Setting The Flash Ratio - Canon Macro Ring Lite MR-14EX Instruction Manual

mn Setting the Flash Ratio

You can adjust the flash ratio of flash tubes/heads A and B or fire only
one of the flash tubes/heads. This can create shadows on the subject to
give a more sculptural look. The flash ratio can be set in half-stop
increments as follows: 1:8 - 1:1 - 8:1 (13 settings)
A:B = 1:1
Since the exposure will be controlled automatically, there is no need to
calculate the exposure.
If the flash mode is <q>, see page 27.
A:B = 4:1 Only flash tube/head A Only flash tube/head B
Select <yl>.
1
Press the <f> button to display
<yl>.
Set the flash ratio.
2
Press <b> or <c> to select from
1:8 - 1:1 - 8:1. The extreme left or
right setting will fire only one of the
flash tubes/heads.
<m>: Only <j> will be fired.
<n>: Only <k> will be fired.
21