Table of Contents
Advertisement
Setting up the scanner
Summary of the Counter menu modes and settings
Number, mode and
default display
01 Select the counter
displayed on LCD
0 1 . D i s p . C o u n t e r
02 Setting the user counter
0 2 . U s e r
C o u n t e r
02 Setting the User
Counter Extender
0 2 . U s e r
C o u n t e r
02 Clear the User Counter
0 2 . U s e r
C o u n t e r
C l e a r = < >
22
Selects for display the cleared counter (Scan) after scanning one
time, or selects for display the user counter (User).
Scan
S c a n
Selects the cleared counter for display after scanning one time, or dis-
plays user-set counter.
Selects the default number (0-9999999) before scanning.
Press
to increase the user counter by one. Press
crease the user counter by one.
0
Pressing and holding down
value in units of 10.
Selects increment number for the extender in the default num-
ber.
+1
+2
+ 1
Press
once to increase user counter extender by one. Press
to decrease the user counter extender by one.
Clears the counter set by the user.
Press
together to clear the user counter.
"Completed" displayed when counter is cleared.
Content
User
or
rapidly increases or decreases the
+3
••••••
+7
once to de-
+8
+9
once
Advertisement
Table of Contents
