Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LINK-MI LM-HD808-4K
Summary of Contents for LINK-MI LM-HD808-4K
- Page 1 HDMI 8×8 Matrix Operating Instructions LM-HD808-4K...
-
Page 2: Product Overview
Introduction LM-HD808-4K is an 8-by-8 HDMI matrix. It allows any of the eight Input Channels (HDMI) to be routed to any of the eight Output Channels (HDMI), no matter the source is HDCP or not. Users can choose several different ways to control the matrix: by using infrared, RS232, and LAN and supplied remote control. -
Page 3: Panel Descriptions
(For example: Output 8 select Input 7, first press output 8, then press input 7, LCD display 8-7) NOTE: if the IR remote isn’t work, please press the” system code switch key”, but please do not put the remote against the LM-HD808-4K 3. Control via RS232. - Page 4 LM-HD808-4K, it will send out the message about “operation results” as below: 2.2) ) ) Status Button Click this button to read the status of LM-HD808-4K. The status is about which input is selected by the output. 2.3) ) ) Send Window Input the control command in this window.
- Page 5 2.6) EDID Set button Select the Output Port in “Port Select” column, click “Read” button to get EDID from display equipment. Select the Input Port in “Port Select” column, click “Write” button to set EDID of this Input Port the same as display equipment.
- Page 6 3.2) ) ) C C C om s s s elect. Select which com you will use. Connect button. The word on this button will change when the connection state changes. If the word is “Disconnect”, then click this button, the com will be closed.
- Page 7 The command length is 4 bytes. rpw+ ‘↙’ “rpw” is the key word , ‘↙’ is carriage return. When you send the Web password reset command to LM-HD808-4K, if succeed, it will feedback "rpw", and the web password will be set as "0000000000".
-
Page 8: Lan Control
4. LAN control Note: Use the direct UTP cable to connect with PC, or use cross cable to connect to the Ethernet switcher & A. Double click Netfinder.exe. Click “Search” button to get the device IP address. B. Click “Web Browser” button. A web browser will be shown. The default password is "0000000000", input the password and login. - Page 9 The right area is for device controlling. Click these buttons to control the device. It is the same as using the remote controller. The left area shows which input ports are being chosen by the output ports. C. Telnet Control Telnet matrix’s IP address Now you can control the matrix (Page 14: Control command format)
-
Page 10: Specifications
Specifications Operating Temperature Range 0 to +35°C (32 to +95°F) Operating Humidity Range 5 to 90 % RH (no condensation) Input Video Signal 0.5-1.0 volts p-p Input DDC Signal 5 volts p-p (TTL) DTV/HDTV:3D/ 1080P/1080i/720P/ Video Format Supported 576P/480P/576i/480i Audio Format Supported DTS-HD、Dolby HD Output Video HDMI 1.3 with 3D...
Need help?
Do you have a question about the LM-HD808-4K and is the answer not in the manual?
Questions and answers