Related Manuals for LINK-MI LM-HD808
Summary of Contents for LINK-MI LM-HD808
- Page 1 Model No： LM-HD808 Operating Instructions Thanks for purchasing our product. Please be sure to read this instruction manual carefully before using our product.
- Page 2 Introduction LM-HD808 is an 8-by-8 HDMI matrix. It allows any of the eight Input Channels (HDMI) to be routed to any of the eight Output Channels (HDMI), no matter the source is HDCP or not. Users can choose several different ways to control the matrix: by using infrared, RS232, and LAN and supplied remote control.
- Page 3 HDMI Matrix (Routing Type) Product Overview ■ Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Features ■...
- Page 4 Notice Grand being Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. Warning To reduce the risk of fire, electric shock or product damage: 1. Do not expose this apparatus 6.
-
Page 5: Package Contents
Package Contents ■ 1x Main unit. P/N_ LM-HD808. 1x Remote. 1x IR RX (IR receiver cable). 1x RS232 converter. 12V/DC Power Supply. Operating Instructions. Mounting ears. NOTE: PART NUMBER (Abbreviation as P/N). Panel Descriptions ■ LCD indicator, displays the status of each output port. -
Page 6: Connections And Operations
HD-DVD/ PS3/STB etc.)Into LM-HD808. Connect HDMI OUT of LM-HD808 to display equipment. Connect the Broadband IR receive cable into LM-HD808 IR RX ports. Power on the input source you want to show. ( Keep the unused input power off, otherwise it may interfere the normal display). -
Page 7: Control Via Ir Remote
7, LCD display 8-7) NOTE: if the IR remote isn’t work, please press the” system code switch key”, but please do not put the remote against the LM-HD808 3. Control via RS232. 1) The Interface of LM-HD808 control... - Page 8 2) The Message Window 2.1) Receive Window The “receive window” will show the message received from HD808. When you click the Control Buttons ( see step 4) or send Control Command ( see 2.3) to HD808, it will send out the message about “operation results”...
- Page 9 2.5) IP SET Button Click this button to set IP address for LAN control (for example: 192.168.0.3). 2.6) EDID Copy Set button To click the menu to choose the INPUT A and Output B can copy the EDID of Output B Display to the Input A and also can do save of the EDID info .
- Page 10 2.7) EDID Set button Select the Output Port in “Port Select” column, click “Read” button to get EDID from display equipment. Select the Input Port in “Port Select” column, click “Write” button to set EDID of this Input Port the same as display equipment.
- Page 11 4) Control command format If user want to write his own control software, below are data format and baud rate setting. Com port setting: Baud Rate: 9600 bps Data bits: 8 bits Parity: None Stop bits: 1 bit Flow control: None 5) RS232 command command...
- Page 12 “y” : indicate the input port, range from 1~8. cir_4x\r\n Output 5 select input 1~8 63 69 72 20 34 xx 0D 0A “x” : indicate the input port, range from 0~7. “y” : indicate the input port, range from 1~8. cir_5x\r\n Output 6 select input 1~8 63 69 72 20 35 xx 0D 0A...
- Page 13 “x” : indicate the input port, range from 1~8. sed_x_y\r\n sed_x_y Copy edid from “x” to “y”, 73 65 64 20 xx 20 yy 0D “x””y” range from 0~7 rst_\r\n Reset factory settings. 72 73 74 20 0D 0A 6) Web password reset The command length is 4 bytes.
-
Page 14: Lan Control
4. LAN control Note: Use the direct UTP cable to connect with PC, or use cross cable to connect to the Ethernet switcher A. Double click Netfinder.exe. Click “Search” button to get the device IP address. B. Click “Web Browser” button. A web browser will be shown. The default password is "0000000000", input the password and login. - Page 15 The right area is for device controlling. Click these buttons to control the device. It is the same as using the remote controller. The left area shows which input ports are being chosen by the output ports. C. Telnet Control Telnet matrix’s IP address Now you can control the matrix (Page 14: Control command format)
- Page 16 Specifications ■ Operating Temperature Range 0 to +35°C (32 to +95°F) Operating Humidity Range 5 to 90 % RH (no condensation) Input Video Signal 0.5-1.0 volts p-p Input DDC Signal 5 volts p-p (TTL) DTV/HDTV:3D/ 1080P/1080i/720P/ Video Format Supported 576P/480P/576i/480i Audio Format Supported DTS -HD、Dolby HD Output Video...
-
Page 17: Maintenance
Maintenance ■ Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit. Product Service ■ ● Provided Service Damage Requiring service: The unit should be serviced by qualified service personnel if: The DC power supply cord or AC adapter has been damaged;... - Page 18 (Parts (1) Year, Labor(90) Days)which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warranty. During the “Labor”...
Need help?
Do you have a question about the LM-HD808 and is the answer not in the manual?
Questions and answers