Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LINK-MI LM-MX88B
Summary of Contents for LINK-MI LM-MX88B
- Page 1 8x8 HDMI Matrix LM-MX88 Operation Manual V1.1...
-
Page 2: Package Contents
1. Introduction The 8x8 HDMI Matrix with EDID control connects eight HDMI sources to eight displays. This matrix provide eight HDMI outputs and each HDMI output is supporting 1080p Full HD up to 4K plus all 3D formats and supporting independent EDID control. It works with Blu-Ray players, Set-Top boxes, Home Theater PCs, and game consoles that connect to an HDMI display. -
Page 3: Specifications
4. Specifications Video Bandwidth 297 MHz Support Video Resolution 480i,576i,480p,576p,720p,1080i,1080p @24/30/50/60Hz, 4K@30Hz, 1080P3D@60Hz Input Ports 8×HDMI, 1×RS-232, 1xRJ-45(Control) Output Ports 8×HDMI ESD Protection Human-body Model: ± 8kV (Air-gap discharge) ± 4kV (Contact discharge) Power Supply 12 V/2.5 A DC (US/EU standards, CE/FCC/UL certified) Dimensions 440 mm (W)×200 mm (D)×45 mm (H) - Page 4 1. LCD display ：Show the status of input-output selection, EDID info and so on. 2. IR receiver window ：Receive the IR from the remote control of 8x8. 3. POWER：Press this button to power the device on/off. The LED will illuminate green when the power is on, red when it is in 'Standby' mode.
- Page 5 ※Note: The EDID mode table 1. #1 submenu：EDID mode table Number EDID Description 1080p, 2CH AUDIO 1080p, DOLBY/DTS 5.1 1080p, HD AUDIO 1080i, 2CH AUDIO 1080i, DOLBY/DTS 5.1 1080i, HD AUDIO 3D,1080p, 2CH AUDIO 3D, 1080p,DOLBY/DTS 5.1 3D,1080p, HD AUDIO 4k*2k@30Hz, 2CH AUDIO 4k*2k@30Hz, DOLBY/DTS 5.1 4k*2k@30Hz, HD AUDIO...
- Page 6 Input 6 Input 7 Input 8 Input ALL EDID. What is it and what is it used for? Under normal circumstances, a source device (digital and analog) will require information about a connected device/display to assess what resolutions and features are available. The source can then cater its output to send only resolutions and features that are compatible with the attached device/display.
-
Page 7: Rear Panel
How to operate the HDMI Matrix? 1. How to select Output and Input Port? Q. OUTPUT-X select INPUT-Y: A. Press OUTPUT-X (X means 1 to 8 of outputs, including ALL) Press INPUT-Y (Y means 1 to 8 of inputs) 2. How to change INPUT-Y EDID Fixed EDID to INPUT-Y/ALL A. -
Page 8: Remote Control
3. HDMI OUTPUT Area ： Output for displays, AVR etc . LED A-H illuminate when the displays plug in corresponding output port with HDMI cable. 4. Power port： Use included DC adaptor to power the matrix switcher. 6. Remote Control Po we r o n /Sta n d b y：... - Page 9 7. Operate and Connect 1. Connect up to 8 sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI inputs on the unit. Do not hot plug! Insert and extract cables carefully with the power SWITCHED OFF.
- Page 10 having difficulty receiving signal, access the display’s menu and adjust the resolution (lowest to highest until signal is displayed). A 24 Hz vertical refresh rate may work better than 60 Hz or higher. Page 9 of 13...
Need help?
Do you have a question about the LM-MX88B and is the answer not in the manual?
Questions and answers