Table of Contents
Advertisement
International ENERGY STAR
The purpose of the International ENERGY STAR
and popularization of energy-efficient equipment.
As an ENERGY STAR
meets the ENERGY STAR
Accessories
If the cutter blade becomes blunt after repetitive use and the tape cannot be cut cleanly,
rotate and reset the Cutter Board as shown in the illustration (1).
If you still have difficulties, replace the Cutter Unit with a new one (item number: TC4) from
an authorized Brother reseller or online at Brothermall.com.
Replacing the Cutter Unit
1. Pull out the two sections of the Cutter Unit (green) in the direction of the arrows shown
in the illustration (1).
2. Install the new Cutter Unit. Unit by pressing the two new pieces down until they lock into
place.
®
Partner, Brother Industries, Ltd. has determined that this product
®
specifications for energy efficiency.
Cutter Board
1
®
Qualification Statement
®
Program is to promote the development
Cutter's Edge
2
Advertisement
Table of Contents
