Table of Contents
Advertisement
APPENDIX A: PRODUCT DATASHEETS OF OPTIONAL EQUIPMENT
The Model CA2Z Class A Module is designed to be used with the PFC-
4410RC Fire Control Releasing Panel to convert from two (Class B)
initiating device circuits to two (Class A) circuits.
Mounting
SUPERVISORY
SUP
SUP
ZONE 1
ZONE 2
CA2Z
MODULE
NO. 2
(IF USED)
J2
Potter Electric Signal Company, LLC • St. Louis, MO • Cust Service: 866-572-3005 • Tech Support: 866-956-0988 • Canada 888-882-1833 • www.pottersignal.com
PRINTED IN USA
VFR-400 • 5403548 • REV W • 8/17
ZONE 3
ZONE 4
PFC-4410RC
PC BOARD
CA2Z
MODULE
NO. 1
J2
DWG# 3527-11
MFG. #5401025 - REV F
UL Listed: Option for use with the PFC-4410RC Series
Transient Protected
Built In 5.1k End Of Line Resistor
PC Board Assembly: Mounts to PFC-4410RC Panel stand-offs
Stock No. 3006013
The module is to be mounted in the upper right hand corner of the panel.
Connection to the panel is made via the 8 pin header mounted on the
back side of the CA2Z.
Typical Wiring
ZONE 1
ZONE 2
ZONE 3
CA2Z
8/06
94
CA2Z
CLASS A INITIATING
DEVICE MODULE
ZONE 4
CA2Z
PAGE 1 OF 1
Advertisement
Table of Contents
