Password; Zone Disabled/Enabled - Viking VFR-400 Manual

The date is shown at the top and the time at the bottom of the display window. "MINUTES" indicates that the user can now
change the minutes.
SET Pressing the SET button will decrease the minutes
SELECT Pressing the SELECT button will increase the minutes.
FUNCTION
When finshed setting the minutes, Press the FUNCTION button. The minutes will change to hours.
Continue this process and change the DAY, MONTH and YEAR. When you have finished changing the year, press the
FUNCTION button. A display similar to the following will appear:
P A S S W O R D =

Password

This display prevents unauthorized programming of the panel by requiring the user to enter the proper password. To select the
appropriate number for the space indicated by the ^ symbol, press the SELECT button. When the proper number is displayed
press the SET button to set the number and move to the next space. If the wrong password is entered, the panel will display "Push
Programming Switch Up". All panels are shipped from the factory with a password of 000. If the password is lost contact Viking.
SET After selecting the desired number, press the SET button to set and move to the next number.
SELECT Press the SELECT button to scroll through the numbers.
FUNCTION Pressing the FUNCTION button will have no effect.
After entering the correct password, a display similar to the following will appear:
I N I T Z O N E
E N A B L E D

Zone Disabled/Enabled

This display allows the user to ENABLE or DISABLE Initiating zones. This display window shows that initiating ZONE #1 is
enabled. To toggle from ENABLED to DISABLED or visa versa, press the SELECT button.
SET After selecting ENABLED or DISABLED, press the SET button to set and move to the
next zone.
SELECT Press the SELECT button to toggle between ENABLED or DISABLED.
FUNCTION To skip to the next function, press the FUNCTION button.
VFR-400 • 5403548 • REV W • 8/17
0 0 0
^
# 1
25