Switching the display indicator
Note: The appliance displays PM2.5 level by default.
Touch and hold
•
PM2.5.
Using the light on/off function
With the light sensor, the control panel can automatically turn on, turn off or dim
according to the ambient light. The control panel will be off or dim when the
ambient light is dark. You can touch any button to wake up all lights. Then, if no
further operation, all lights will be off or dim again to match with the ambient
light.
You can touch the
Touch any button to wake up all lights.
EN
10
button for 3 seconds to switch display indicator among IAI /
button manually to turn off all lights and the control panel.