Contents Your air purifier ������������������������������������������������������������������� 4 Product overview ��������������������������������������������������������������������������������������������4 Controls overview �������������������������������������������������������������������������������������������5 Getting started ������������������������������������������������������������������� 5 Installing the filter �������������������������������������������������������������������������������������������5 Using the air purifier ���������������������������������������������������������6 Air quality light �������������������������������������������������������������������������������������������������6 Turning On and Off ���������������������������������������������������������������������������������������� 7 Changing the mode setting ���������������������������������������������������������������������8 Switching the display indicator ��������������������������������������������������������������9 Using the light on/off function ���������������������������������������������������������������9 Checking the filter status �������������������������������������������������������������������������10...
Your air purifier Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at Philips�co�in/welcome� Product overview Air outlet Control panel Particle sensor NanoProtect filter Series 3 (FY2180/10) Back cover...
Controls overview Mode display: Auto ( Filter cleaning alert Turbo( Gentle( Filter replacement alert Sleep( Filter status/ reset button Light on/off button Display switch button Mode switch button Power on/off button 2 Getting started Installing the filter Note: Make sure the air purifier is unplugged from the electrical outlet before installing the filter� Pull the back cover and remove it from the appliance�...
3 Using the air purifier Air quality light After approximately 30 seconds, the particle sensor selects the color that corresponds to the surrounding air quality of airborne particles� Note: The color of the air quality light is determined by the highest risk index among PM2�5, IAI and readings�...
Turning On and Off Note: • Put the plug of the air purifier in the power socket� • If the purifier stays connected to the electrical outlet after turning OFF, the air purifier will operate under the previous settings when turned ON again� •...
Changing the mode setting You can choose Auto mode, Turbo mode, Gentle mode or the Sleep mode by button � touching the ) : Auto mode ( Turbo mode ( The air purifier The air purifier automatically adjust the fan speed in operates on the highest speed�...
Switching the display indicator Note: • The appliance display PM2�5 level by default� Using the light on/off function You can touch the light on/off button manually to turn off all lights and the control panel� Touch any button to wake up all lights� With the light sensor: •...
Checking the filter status • Touch the filter status check/reset button to check the filter service life status� Icon color Display (%) Blue 16-100 Blue-purple 9-15 Purple-red Note: The appliance goes back to normal display if no operations after 3 seconds� 4 Cleaning and maintenance Note: •...
Cleaning the surface of the filter Clean the surface of filter with vacuum cleaner when the filter cleaning alert display on the screen� Pull the Pull the Clean the Put the Reattach back filter surface of filter back the back cover and from the the filter...
• Do not smell the filter as it has collected pollutants from the air� When the filter need to be replaced, the filter replacement alert lights up red� Replace the filter with Philips NanoProtect filter Series 3 (FY2180/10) , Please follow the step of Chapter "Installing the filter"� 3″ Touch and hold the...
Filter reset You can also replace the filter before filter replacement alert ( ) displays on the screen� After replacing a filter, you need to reset the filter lifetime counter manually� 3″ Touch the power Put the power Within 15 seconds after button for 3 seconds plug in the power power on, touch and...
6 Troubleshooting This chapter summarizes the most common problems you could encounter with the appliance� If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country� Problem Possible solution • Check if the back cover is properly installed� The appliance •...
Page 15
Philips dealer or an authorized Philips service center� The filter may produce smell after being used for a while because of the absorption of indoor gases� It’s recommended that you reactivate the filter by putting it in direct sunlight for repeated use�...
Need help?
Do you have a question about the AC1758/63 and is the answer not in the manual?
Questions and answers