Copied Lines And Text Appear Faded; Printed Bar Codes Cannot Be Scanned; Sided Printing - Canon imageCLASS D550 Basic Operation Manual

<Cause 2> The machine is exposed to direct sunlight or strong light .
Solution

Copied Lines and Text Appear Faded

A A A A
B B B B
C C C C C C
Perform the following procedure.
<Cause> <Original Type> is set to <Text/Photo (High Speed)> (default).
Solution

Printed Bar Codes Cannot Be Scanned

Perform the following procedure.
<Cause> When printing a bar code with the default printing preferences, the bar code may not be able to
be scanned.
Solution
Paper Jams Occur Frequently When Performing 2-Sided Printing
Perform the following procedure.
<Cause> Depending on the paper type (especially for thin paper or curled paper), paper jams occur frequently when
performing 2-sided printing.
Solution
7-18
Move the machine.
e-Manual → Maintenance → Transporting the Machine
Set <Original Type> to <Text>, and then try to copy again.
"Selecting Image Quality (Copy)" (→P.3-4)
Change the [Special Print Mode] setting to [Special Settings 1] from the print driver.
e-Manual → Maintenance → Special Mode
* When [Special Settings 1] is selected, printing density is lower than when [Off ] is selected. Also, text or lines may be
less clear.
Change the <Special Mode I> settings from the operation panel.
e-Manual → Maintenance → Special Mode
* Maintain this setting <Off> in normal conditions. Change the setting only when the problems mentioned above
occur.
* If you use this mode when you are not using thin paper, images may become white.