Storing Wine And Shelves - Vinotemp ELEMENT EL-54SDTH Owner's Manual

DYNAMIC COOLING/SILENT MODES
The Dynamic Cooling feature enables the relative humidity inside the unit and the temperature to be
distributed evenly around the interior, so you can store all of your wine under the exact same excellent
conditions. If you would like to use the unit to store wine long term, the dynamic cooling is a must. This
will create a continuous climate in the cabinet which imitates that of a wine cellar.
In the Dynamic Cooling mode, the interior fan circulates the inside air evenly until the set temperature is
reached. Dynamic Cooling is the factory preset mode. To change to Silent mode, touch and hold the UP
button for 5 seconds. The wine cooler will beep three times to confirm silent mode is on. To change back
to Dynamic Cooling mode, touch and hold the DOWN button for 5 seconds. The wine cooler will beep five
times to confirm Dynamic Cooling is on.
STORING WINE
While bottles may vary in size and dimension, this wine cooler is
designed for standard Bordeaux 750ml bottles that are
approximately 11.8 inches in length/height. You can place 8
standard bottles on each full-size shelf and 6 standard bottles on
each half-size shelf. Approximate bottle capacity is 52~54 bottles.
Replace the door gasket to its original position.
NOTE: Wine bottles on bottom shelf cannot be longer than
approximately 12 inches.
SHELVES
To avoid damaging the door gasket, ensure that the door is fully opened when pulling the shelves out of
the rail compartment.
•
The slide-out shelves allow bottles of wine to be viewed
and removed more easily. Any of the shelves can be
removed to store larger bottles.
•
For easy access to the storage bottles, you must pull the
shelf approximately 1/3 out of the rail compartment,
however this unit was designed with a plastic post on
each side of the shelf track to prevent bottles from falling.
•
When removing the shelf from the rail compartment, make
sure to remove all items first. Then move the shelf to the
position where the notch of the shelf is exactly under the
plastic post and lift the shelf. In order to replace the shelf,
repeat steps described above in reverse.
DOOR LOCK
Your unit is provided with a lock and key combination. The keys are located inside the plastic bag that
contains the Owner's Manual. Insert the key into the lock and turn it counterclockwise to unlock the door.
To lock the door, insert the key into the lock and turn it clockwise making sure metal pin is engaged
completely. Remove the key and place it in a secure place for safekeeping.
10
0