Table of Contents
Advertisement
Cleaning
Always remove the electric plug from the mains supply before any cleaning is
!
undertaken.
• Remove any grass and mud after each use to prevent it from drying. Use a
clean cloth to remove dirt, grease, etc.
• DO NOT use any water on any part of the main machine.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by
their use.
• Always ensure that ventilation openings are kept clear of debris.
The Blade
WARNING!
!
• Never touch a rotating blade.
• The blade should always be sharp and well balanced. At regular intervals,
check the tightness of all nuts, bolts and screws.
• If the blade hits an obstacle, check for damage and if the machine vibrates
badly, stop the machine and take it to a service dealer.
• It is best if all interventions on the blade are done at a specialised centre that
has the special tools and equipment.
Maintenance & Care
www.hyundaipowerproducts.co.uk
36
Advertisement
Table of Contents
