Important Safety Recommendations - ACDC RAPTOR Installation Instructions And User Manual

Important safety recommendations

The new GDO is professional designed under the newest design idea. The installation and setting of
this GDO is extremely easy. It has complete functions, give the users a relaxed and happy
installation experience.
Safety Warnings
Warning: It is very important to read this safety warnings and follow all instructions before installing.
Or it may cause serious personal injury and/or property loss. Save these instructions
1. This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance or its controls, including transmitters. Keep the
transmitters out of the reach of children. Cleaning and user maintenance shall not be made by
children without supervision.
2. We strongly recommend to install photocell to increase safety protection and psychological
security.
3. Before installing the drive, remove all unnecessary ropes or chains and disable any equipment,
such as locks, not needed for powered operation. Check that the door is in good mechanical
condition, correctly balanced and opens and closes properly.
4. A-weighted emission sound pressure level of the drive LpA ≤ 70 dB(A).
5. The operator must not be used for doors without a safety catch.
6. Install the actuating member for the manual release at a height less than 1,8 m. If removable, the
actuating member should be stored in direct vicinity of the door.
7. Install any fixed control at a height of at least 1,5 m and within sight of the door but away from
moving parts.
8. Wall switch or wall transmitter must be installed out of the reach of children.
9. Permanently fix the labels warning against entrapment in a prominent place or near any fixed
controls.
10. Permanently fix the label concerning the manual release adjacent to its actuating member.
11. After installation, ensure that the mechanism is properly adjusted and that the drive reverses or
the object can be freed when the door contacts a 50 mm high object placed on the floor. Ensure that
parts of the door do not extend over public footpaths or roads.
12. Refer to pages 4-8 for information on how to adjust the door and drive.
13. Connect the GDO to 230-240V circuit, and fix it to the required place by professional person.
WARNING: The drive shall be disconnected from its power source during cleaning,
maintenance and when replacing parts.
- 1 -