Table of Contents
Advertisement
Quick Links
Installation Instructions
and
User Guide
RAPTOR
Garage Door Driver Ⅰ
1200N
WARNING
Please read the manual carefully before installation and use. The installation
of your new door opener must be carried out by a technically qualified or
licensed person. Attempting to install or repair the door opener without
suitable technical qualification may result in severe personal injury, death and
/ or property damage.
Advertisement
Table of Contents
Summary of Contents for ACDC RAPTOR
- Page 1 Installation Instructions User Guide RAPTOR Garage Door Driver Ⅰ 1200N WARNING Please read the manual carefully before installation and use. The installation of your new door opener must be carried out by a technically qualified or licensed person. Attempting to install or repair the door opener without suitable technical qualification may result in severe personal injury, death and / or property damage.
-
Page 2: Table Of Contents
CONTENTS Important safety recommendations..……………………..………….………………..………..…..1-2 Basic function introduction………..…………………..…………………………………...……………...3 Special function introduction………….………………………………..………….………….…………..3 Installation……….……………………………………………………..……………….…….…………….4 Installation (aluminum track) ……..….……………………………..…………….………….…..……..5-6 Installation (one-piece steel track)………………….……………………………………………….…..7-8 Installation (sectional steel track)..…………….………………..……...….………….…………..…9 Installation recommendations…………………………………………..……………….………………..10 Basic function setting…………………………………………………..……………………...……..11-12 Special function introduction (optional)…………..……………………………..……..………..……….13 Wiring guide…………………………………………………………………………………………………14 Manual disengagement……………………………………………………………………..……………..15 Maintenance……………………………………………………………………….……..………………...15 Manufacturer‟s declaration…………………………………………………………..…………………….16 Final note….…………………………………………………………………………..….………………..16 Technical specifications…………………………………………………………..………………………..16 Standard packing list………..……………………………..……………………………………………..17 General Error Code…………………………………………………………………………………………17... -
Page 3: Important Safety Recommendations
Important safety recommendations The new GDO is professional designed under the newest design idea. The installation and setting of this GDO is extremely easy. It has complete functions, give the users a relaxed and happy installation experience. Safety Warnings Warning: It is very important to read this safety warnings and follow all instructions before installing. Or it may cause serious personal injury and/or property loss. - Page 4 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. 15. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
-
Page 5: Basic Function Introduction
Basic function introduction 1. Soft start, soft stop. Minimize start-up load on garage door opener and garage door 2. The door will stop during opening when contacting obstruction, and will reverse at least 30cm during closing when contacting obstruction. 3. Opening & closing force dynamically self-learning. Can make sure the garage door driver will work steadily in spite of change of door resistance by seasonal variation. -
Page 6: Installation
Installation 1). Read the instructions carefully. 2). Make sure the door structure is solid and suitable to be motor driven. 3). Make sure that when the door is moving there are no friction points. 4). The door must be properly balanced and must be easily lowered and raised by hand. - Page 7 Fig.3 Fig.4 Maintain a minimum gap of 30mm from the top panel‟s maximum height (Fig. 3). Make sure the track is horizontal and vertical to the shaft. Make sure the connection of hanging bracket F and ceiling is firm enough (Fig. 4). Warning: Make sure the opener is affixed to noggins in ceiling and not to plasterboard.
- Page 8 Fig.6 Installation procedure 1. Fixing the wall bracket. Fixing the wall bracket to the wall 2cm-15cm over the shaft or intermediate bracket (depend on the actual installation space). 2. Fixing the steel track to the wall bracket with cotter pin. 3.
-
Page 9: Installation (One-Piece Steel Track)
Installation (one-piece steel track) Wall bracket Iron angle A Cotter pin Track bracket Straight arm Bent arm Door bracket Motor shaft adapter U bracket A Fig. 7 Fig. 8 - 7 -... - Page 10 Installation procedure 1. Fixing the wall bracket. Fixing the wall bracket to the wall 2cm-15cm over the shaft or intermediate bracket (depend on the actual installation space). 2. Fixing the steel track to the wall bracket with cotter pin. If the track is with belt, then go for step 3, if track is with chain, then skip to step 4 3.
-
Page 11: Installation (Sectional Steel Track)
Installation (sectional steel track) 1. Cut the plastic cable tie on the first piece track Fig.9 2. Fix the first sleeve to the first piece track Fig.10 3. Fix the second piece track to another end of first sleeve Fig.11 4. -
Page 12: Installation Recommendations
Installation recommendations there are specific standards that have to be strictly followed regarding the safety rules of Remember electrical installations and automatic gates and doors. As for the legal requirements and standards that must be adhered to, please take notice of the following points to ensure maximum safety and reliability of your installation. -
Page 13: Basic Function Setting
Basic function setting 1. Limit setting Opening & closing force dynamically self-learning Press „SET‟ button and hold on until the LED displays figure „1‟, then adjust the up limit by pressing „up‟ button. Fine-tuning „UP‟ or „DOWN‟ button to determine the final up limit position then press „SET‟... - Page 14 3. Safety reverse force adjustment Press „SET‟ button and hold on until the LED displays „3‟. It‟s under force adjustment mode. LED shows the current force level. Press „UP‟ button to increase the force level and „DOWN‟ button to decrease the force level. Version 1: Maximum force level is 9, minimum is 1.
-
Page 15: Special Function Introduction (Optional)
Special function introduction (optional) The following functions are made to order in accordance with the special needs of customers: 1. Flash light function There are corresponding interfaces for this function and provide 24v-35v flash light voltage. Connect the flash light with DC 24v-28v, current ≤ 500mA(Fig.18). When use AC 230-240V power flash lights, please match an adapter, and wiring as required (Fig.19). -
Page 16: Wiring Guide
Wiring guide Fig.15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 - 14 -... -
Page 17: Manual Disengagement
Manual disengagement The opener is equipped with a manual release cord to disengage shuttle and move door by hand while holding the handle down (Fig 19). Pull on the handle to disengage the shuttle. To re-engage the door simply run opener in automatic mode or move door by hand until the trolley engages in the chain shuttle. -
Page 18: Manufacturer"S Declaration
Manufacturer’s Declaration We hereby declare that the product of this model corresponds in its design, construction and version to the relevant and basic health and safety requirements of the following EC regulations: EMC Directive and Low Voltage Directive. The detailed standards are as follows: EN 55014-1 EN 55014-2 EN 61000-3-2, EN 61000-3-3... -
Page 19: Standard Packing List
Standard packing list Item Quantity Door opener Track ( incl. Clutch) Remote control Door bracket Wall bracket “U” bracket A “U” bracket B (If aluminum track) Iron angle A Track bracket Clutch cord Cord pendant Straight arm Bent arm Fixing kit General Error Code Code Failure Possible causes... - Page 20 - 18 -...