Ricoh PENTAX K-3 Mark III Faq page 32

Select [Color Fringe Correction] from
the edit menu.
Select [Finish] to end RAW development and [Continue] to continue developing and press OK.
This can be set only when a lens that supports [Lens Correction] is attached.
・
Also, if an accessory such as the Rear Converter etc. is attached between the camera and
The Lens, the setting will be invalid.
When the [Recording Format] of
・
information is recorded in the parameters of the RAW file and can be turned on or off during
RAW development.
If you set [Lens Correction] other than the default setting, it will take time to save the image.
・
The initial settings are [Lat-Chromatic-Ab Adj] ON, [Diffraction Correction] ON, [Distortion
Correction] OFF and [Peripheral Illumin. Corr.] OFF.
Select the correction strength from the
[Color Fringe Correction] menu.
5 Recording Setting menu is RAW / RAW+, the correction
- 32 -