Ricoh PENTAX K-3 Mark III Faq page 22

◆Reducing Blurring of Image
Q: What is the K-3 marklll Shake Reduction method?
A: It is equipped with the sensor shift type Shake Reduction mechanism, SRll, which can correct camera
shake with all lenses.
For 5-axis correction corresponded to angular blur that tends to occur in macro photography, and
rotational
blur that cannot be handled by the in-lens Shake Reduction mechanism.
A correction effects about 5.5 steps can obtained in terms of shutter speed.
Q: Does the Shake Reduction SRll also support panning?
A: Yes,
When panning is detected, the camera determines the direction of shaking and control the SRll
mechanism to correct only other blurring, and support both normal shooting and panning without
switching operations.
In addition, a new 'Panning' exclusive mode is also installed to prevent erroneous correction in
planning shots of minute movements.
Q: Are there any lenses that cannot use the Shake Reduction SRll mechanism?
A: You can use the SR mechanism of K-3 marklll with all the lenses that can be attached. If the lens
cannot obtain focal length information, enter the focal length from 8mm to 2000mm.
The F/FAJ/FA lens, which can automatically communicate lens information when mounted with
・
camera, supports 5-axis, and the other lenses support 3-axis Shake Reduction of pitch, yaw
and rotation
・Depending on the lens, the information on the lens is limited, so the effect of 5-axis SR may
differ.
- 22 -