Ricoh PENTAX K-3 Mark III Faq page 21

■ When the result of adjustment is as follows,
・When the focus direction (+ or -) of the adjustment value tends to be the same for multiple
lenses you have.
・Even if you make fine AF adjustments, the focus may be lost depending on the subject.
In these situations, it is possible that the AF accuracy is a problem with the customer's camera
Please bring or send in the camera / lens together to the Ricoh Imaging Service Centre,
we will provide an inspection service and make adjustments if necessary.
*In case of any costs will be involved, we will contact you before the adjustment.
Q: Does the K-3IIl have an AF assist light?
A: Yes, it does. The AF assist light is activated when AF. S mode is selected.
You can switch on/off with the
Q: What kind of function is Catch-in Focus.
A: The shutter is released automatically when the subject comes into focus
Use a manual focus lens or a lens with the AF/MF switch set to MF.
1. Attach a manual focus lens to the camera.
2. Set the focus mode to AF.
4. Place the camera on a fixed support such as tripods.
When the subject comes into focus at the specified position, the shutter is released automati
cally.
Q: Please tell me how to use Smart Function conveniently.
A: By using the combination of S.Fn button and S.Fn dial, you can change the function to be use
d while looking through the viewfinder.
The settings for each function can be registered in the C2 menu [Smart Function] for function 1
・
to 5
to be used by the user
You can change the settings while looking at the function icon displayed in the viewfinder.
・
1. Press the S.Fn button.
3. Turn the S.Fn dial to change the setting.
1 Focus Setting Menu [AF Assist Light].
- 21 -