Protecting Photos - Canon VIXIA HF21 Instruction Manual

To select the photo capture settings
FUNC. [ Menu]
[ Single Photo] or [
Continue from the same menu:
[Photo Capture Quality]
* The number displayed at the bottom indicates the approximate number of photos
that can be recorded with the current quality setting.
To capture the photo(s)
1 Play back the scene containing the picture you want to capture.
2 Pause the playback at the point you want to capture.
PHOTO
3 Press
To capture a photo sequence, hold
NOTES
• The data code of the photos will reflect the date and time of recording of
the original scene.
• Photos captured from a scene with a lot of fast movement may be
blurred.
• Photos will be recorded on the memory selected for recording photos.
• [ Photo Sequence]:
- Up to 100 photos can be captured at a time.
- The photo sequence capture will stop when the end of the scene is
reached (playback will pause at the beginning of the following scene).
- Photos will be captured at intervals of 1/30 second (1/24 second, if
the scene was recorded at a frame rate of [

Protecting Photos

You can protect photos from accidental erasure.
Operating modes:
Protecting Single Photos
1 In single photo view, open the photo selection screen.
FUNC. [
[ Protect] appears on the screen.
108
Photos
[Photo Capture from Video]
Photo Sequence]
fully.
Protect]
Desired photo quality*
PHOTO
pressed down.
PF24]).
FUNC.