Advertisement
Preparation before disassemble
disassemble
1.Clean the room for
2.Identify the area for monitor
3.Check the position that the monitors be placed and the quantity of the monitor ;prepare the area for material flow;
according to the actual condition plan the
4.Prepare the implement, equipment, materials as bellow:
1) working table
2) Screw-driver
3) knife
4) glove
5) cleaning cloth
6) ESD protection
After unplugging the power cord, the power board still have power energe. Please pay attention
when disassembling/assembling Power BD.
S1
Disassemble the RC,
stand and base
S2
Disassemble FFC Ctrl
from the PCBA.
PICTURE 1
4. Disassembly and Assembly SOP
4.1 Disassembly Procedures
disassemble
Disassemble base and column from the RC. Unlock RC screws.
Disassemble RC from monitor.
Tear off the adhesive tape from the RC(Rear Case). Tear off the FFC CTRL on the RC
as picture 1. Disassemble the CTRL BD from the RC. Disassemble the FFC CTRL from
the CTRL BD as picture 2.
B277U
layout
PICTURE 2
ACER B277U
7
Advertisement
