Advertisement
Preparation before disassemble
1.Clean the room for
disassemble
2.Identify the area for monitor
3.Check the position that the monitors be placed and the quantity of the monitor ;prepare the area for material flow;
according to the actual condition plan the
4.Prepare the implement, equipment, materials as bellow:
1) working table
2) Screw-driver: Philips-head screwdriver, Hex-head screwdriver
3) knife
4) glove
5) cleaning cloth
6) ESD protection
After unplugging the power cord, the power board still have power energe. Please pay attention
when disassembling/assembling Power BD.
S1
Disassemble the
RC
, stand
(Rear Case)
and base
PICTURE 1
PICTURE 3
4. Disassembly and Assembly SOP
4.1 Disassembly Procedures
disassemble
Before Disassembling & Assembling, monitor need to be put on the sponge and
the Insulation glove must be wore during the process.
Unlock 4 RC screws and disassemble stand from RC as picture 1.
Unlock RC center and disassemble RC from MF as picture 2.
Tear off adhesive tape and CTRL FFC from RC as picture 3.
Unlock 2 CTRL BD screws and disassemble CTRL BD from RC as picture 4.
XB323U
layout
PICTURE 2
PICTURE 4
ACER XB323U
7
Advertisement
