System; Start Climbing Position - xsto DC Series Operation Manual

3.4 Turning on the Stair Climber
prevention system

3.5 Start Climbing Position

and misoperation
Turning on the stair climber.
the state: "1" means turn on,
and "0"means turn off. The
screen on the battery box
shows the battery level.
(after 10 minutes of no
operation, the misoperation
prevention system will turn
on automatically and the
indicator lights on both
sides will turn off
automatically. At this time,
the machine cannot climb
the stairs. Turn off the
battery and turn it on again,
and the misoperation
system will turn off.)
Adjust the climbing arm,
make sure that one side of
the arm wheels do not touch
the ground and the other
side wheels are above the
stair. as shown position in the
picture.
20