Honeywell Gent Vigilon Plus Manual page 101

How to Disable Zones and Sectors
Disabling and Enabling Zones
CONTROL
This option will disable ALL Sensing parts of a Device or Devices Including MCPs
Disabling and Enabling Sectors
CONTROL
Disabling a Sector of a Loop will prevent only the Outputs
i.e. Sounder, Strobe, Interface Channels, of any Devices
assigned to the Sector from being switched on if that
Sector is actioned.
Each Loop has 32 Sectors
DISABLE
ZONE
Or
ENABLE
DISABLE
SECTOR
Or
ENABLE
Type and Enter
a Zone Number
LOOP Enter
or Range of
Zone Numbers
Type and Enter
a Sector
LOOP
or Range of
Sectors
Type and Enter
a Loop Number
Enter
or range of
Loop Numbers
Numbers