Selecting and setting the menu, continued
bEEP menu / beep sound
MENU
bEEP
OFF
Use the
,
buttons to select the desired
beep mode:
ON
A beep is emitted when :
- A button is pressed
- A measurement is taken
- An error occurs
OFF
No beep sound
Auto
A beep is emitted when:
- A measurement is taken
- An error occurs
Unit menu / measurement units
MENU
UNIT
in
Use the
,
buttons to select the desired
measuring unit:
m
Value displayed in m
in
Value displayed in feet, inches and
fractions
28
3. Operation
Press the
button
to select menu mode.
Use the
,
buttons to select the
bEEP menu.
Press the
button
to select menu mode.
Use the
,
buttons to select the
UNIT menu.
4. Working with the PD 20
4. Working with the PD 20
Measuring distances
Switch on the tool.
The following is displayed:
LASER
- - - - -
Position the rear edge of the tool at
the desired starting point and aim it at
the target from which the
measurement is to be taken.
Press the "measure" button.
The measured value is then
displayed.
29
The laser beam is
switched on.
After switching on the
tool, the reference
point is always set to
the rear edge of the
tool (symbol).
continued