Dri-Eaz DrizAir 1200EB Owner's Manual

Dri-Eaz DrizAir 1200EB Owner's Manual

Advertisement

Tel: +44 (0)1908-611-211 Fax: +44 (0)1908-611-363 www.legendbrandseurope.com
DrizAir® 1200EB dehumidifiers reduce humidity in enclosed structural environments by
removing water vapor from the air. The 1200EB is engineered to be rugged, durable and
highly portable, making them ideally suited for water damage restoration, structural drying,
construction, and other applications requiring temporary, high-performance
dehumidification.
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
SAFETY INSTRUCTIONS
WARNING
WARNING! Electric shock hazard, rotating fan
hazard and hot surface hazards.
• Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
• Must be earthed. Insert three-prong plug on power
cord into a matching electrically earthed outlet. Do
not use adapter. Never cut off third prong. Do not
use an extension cord.
• The unit must be operated on a 230V/50 Hz circuit
protected by a Residual Current Device (RCD)
device.
• Keep motor and wiring dry.
• Always unplug unit before cleaning or servicing.
• Do not attempt to repair the unit. For service, contact
your local distributor.
FIRE HAZARD
• Keep away from open flames and heat sources.
• Do not use or store where vapors from gasoline,
solvents, thinners or other flammable materials may
be present.
07-01721B F430-230V UK 1200EB
Owner's Manual
DrizAir 1200EB Portable Dehumidifier
LEGEND BRANDS HOLDINGS LTD.
22 Plover Close, Interchange Park, Newport Pagnell, MK16 9PS
Patents: http://www.LBpatents.com
F430-230V
BEFORE YOU BEGIN
Warranty registration
Warranty registration procedures vary by
country/market. Contact your local distributor for
assistance. Registration allows us to better assist you
with using, maintaining or servicing your equipment and
to contact you in case we have important safety
information concerning your Dri-Eaz product. If you
determine service is required, have your equipment
model, serial number and original proof of purchase
available and ask for assistance with obtaining a return
material authorization (RMA).
GROUNDING INSTRUCTIONS
This unit's plug must be inserted into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING! Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service
person if you are in doubt as to whether the outlets
are properly grounded. Do not modify the plugs
provided with the appliance – if the plugs do not fit
the outlets, have proper outlets installed by a
qualified electrician.
This equipment is for use on circuits with a nominal
rating of no more than 230V.
Handle the unit carefully
Always operate the unit on a stable, level surface. Do
not drop, throw, or place where it could fall. Rough
treatment can damage the unit, and may create a
hazardous condition or void the warranty.
This unit intended for household and commercial use.
INTRODUCTION
Dehumidifiers reduce humidity in enclosed structural
environments by removing water vapor from the air. With
1
Legend Brands Holdings Ltd.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DrizAir 1200EB and is the answer not in the manual?

Questions and answers

Summary of Contents for Dri-Eaz DrizAir 1200EB

  • Page 1 Registration allows us to better assist you with using, maintaining or servicing your equipment and to contact you in case we have important safety information concerning your Dri-Eaz product. If you determine service is required, have your equipment model, serial number and original proof of purchase available and ask for assistance with obtaining a return material authorization (RMA).
  • Page 2: Positioning A Dehumidifier

    Control panel. damage caused by high humidity. For best results, use Process (dehumidified) Molded indent the 1200EB with Dri-Eaz TurboDryer® airmovers air outlet (not shown). for cord storage. placed around the perimeter of the room to distribute heat energy and release moisture from wet surfaces into the air.
  • Page 3 230-volt (15 amp) grounded outlet, which is standard in 4. When the desired language is shown in the display, most homes. unplug the unit, and the language is set. If the unit experiences a loss of power, either from a power interruption or from thermal overload protection, CLEAR.
  • Page 4: Maintenance

    The 1200EB is equipped with a disposable 4_PRO filter. Annually Replace only with a new 4-PRO Filter (Dri-Eaz part no. Have the pump system inspected by a qualified service F581). For parts and service call your local distributor or center.
  • Page 5: Error Messages

    M E S S A G E ER 1, 2, 3, 5, 6 Problem with electronic control panel. Contact Dri-Eaz. ER 4 Check the temperature or sensor cable. Contact Dri-Eaz. ER 8 Check the control panel keys. Press and release each key several times. ER 9 Check for obstructions or kinks in the drain hose.
  • Page 6: Troubleshooting

    Increase room temperature. little water Room temperature is too low. Check filter and coils; clean as necessary. If the problem you are experiencing is not listed here, call your local distributor or contact your local Dri-Eaz Distributor. SPECIFICATIONS Model DrizAir 1200EB F430-230V Water removal AHAM 67 pts.

Table of Contents