Echo Pro Attachment Series Operator's Manual page 18

ASSEMBLY
Battery Charging
Note: See separate operator's manuals packaged with battery and
charger.
• Use only with ECHO eFORCE™ 56V battery series batteries and
chargers.
• Keep charger and battery away from damp conditions and all liquids.
• Do not operate the charger on an easily combustible surface (e.g. paper,
textiles) or in an environment with a high risk of fire.
• Do not cover the charger. Covering the charger will prevent it from
cooling.
• Do not operate the charger in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Charger can produce
sparks which may ignite the dust or fumes - there is a risk of explosion.
• Connect the charger only to the mains of voltage and frequency specified
on the rating plate.
• Connect the charger only to an easily accessible wall outlet.
• Never insert objects in the battery's or charger's cooling slots.
• Do not charge or use a defective, damaged or deformed battery and
charger.
• Do not open, damage or drop the battery or the charger.
• Fluid may leak from the battery if it is damaged or not used properly;
avoid contact with the skin. In the event of accidental contact, wash the
affected areas of the skin with plenty of water and soap. If fluid gets in the
eyes, do not rub. Rinse the eyes with plenty of water for at least 15
minutes. Also seek medical assistance.
• Never bridge (short circuit) the battery contacts or the charger's terminals
with metallic objects.
• Protect from direct sunlight, heat and open flames and never throw
battery into fire; there is a risk of explosion.
18
DPAS-2600SB
X7508230800
©11/21 ECHO Incorporated