KEF LSX II User Manual page 92

Speaker Pattern
Blinking white and
Secondary
blue
Primary
and
Blinking red quickly
Secondary
Primary
Blinking red and
and
amber slowly
Secondary
Blinking white, blue,
Primary
light blue, purple,
and
pink and yellow
Secondary
alternately
Status
The Secondary Speaker is in the wireless pairing
mode searching for the Primary Speaker.
1. Make sure Cable Mode is disabled on the KEF
Connect app (Settings > Speaker preferences
> Cable mode)
2. On the Primary Speaker, press the (P) P/S
Pairing button once. The Primary Speaker
will search for the Secondary Speaker for
reconnection.
System error.
1. Pull the power cables from both speakers.
2. Wait approximately 60 seconds.
3. Plug the power cables back to both speakers.
4. The LED indicator of the Primary Speaker
should be pulsing amber, indicating that the
speakers are attempting to connect to the
network.
If the problem persists, please contact your KEF
dealer.
Overheat protection is activated.
The firmware is being updated. Do not unplug
the power cables until the firmware update is
completed. If you encounter any issues during
the firmware update, do not interrupt the
process and contact your local representative or
contact your local KEF dealer.
92