Download Print this page

KEF LS50 Wireless Requirement For Firmware Update

Hide thumbs Also See for LS50 Wireless:

Download this manual

Requirement for firmware update:

a) Window 7/8/10 64bit/32bit.

b) The computer must be connected to the Internet.

c) Disable firewall/Antivirus if necessary.

d) The speaker must be in Wi-Fi mode and connected to the internet.

e) Make sure the update is under a stable network. The process may take up to 10 minutes.

Procedures:

1) Download the software update installer to your PC.

2) Run by double clicking the installer.

3) Connect left and right speakers.

KEF LS50 Wireless

Page 1 KEF LS50 Wireless Requirement for firmware update: a) Window 7/8/10 64bit/32bit. b) The computer must be connected to the Internet. c) Disable firewall/Antivirus if necessary. d) The speaker must be in Wi-Fi mode and connected to the internet. e) Make sure the update is under a stable network. The process may take up to 10 minutes.
Page 2 KEF LS50 Wireless 4) Connect USB cable from speaker to PC. 5) Power on speaker.
Page 3 6) Switch to Wi-Fi source and make sure Wi-Fi indicator is solid white. 7) Make sure you are connected to the Internet. 8) The tool will automatically search for LS50 Wireless. Please make sure, 1. Computer and speaker are in the same network.
Page 4 KEF LS50 Wireless 9) The update tool will connect to the internet to check for the latest firmware. 10) Firmware versions are shown. Press the "Update" button. 11) The firmware update starts. Including the following 5 steps:...
Page 5 KEF LS50 Wireless 1. Download firmware. 2. Update Wi-Fi firmware. 3. Reboot speaker. 4. Update right speaker. 5. Update left speaker. 12) Update completed.