Led Indicators - KEF LSX II User Manual

17.4

LED Indicators

The connection and operation status can be easily checked through the colours and
patterns of the LED indicator lights on the Primary and Secondary Speakers. Refer to
the table below.
Speaker Pattern
Blinking white and
Primary
amber
Primary Pulsing amber
Primary
Solid amber*
Primary
Blinking amber
Primary
Solid white*
Primary
Solid green*
Primary
Solid blue*
Primary
Pulsing blue
Primary
Solid light blue*
Primary
Pulsing light blue
Status
LSX II is ready to connect to a Wi-Fi network.
Launch the KEF Connect app to set up the
speakers.
The speakers are in Standby Mode and trying to
connect to a Wi-Fi network.
The speakers are in Standby Mode and
connected to the Wi-Fi network.
The speakers are unable to connect to a Wi-Fi
network.
• Make sure your router is turned on.
• Move the Primary Speaker closer to the
router. If the problem persists, connect the
Primary Speaker to your router by a LAN
cable.
• If this happens right after the network
connection, it is likely that the Wi-Fi password
is incorrect. Perform factory reset (Press and
hold the Reset button (R) on the Primary
Speaker until the LED light above the button
blinks) and try the connection process again.
The speakers are operating in Wi-Fi mode.
The speakers are operating in Spotify Connect
Mode.
The speakers are operating in Bluetooth Mode
and a device is already paired with the speakers.
The speakers are in the Bluetooth discovery
mode and are ready to pair with a Bluetooth
device.
The speakers are operating in TV Mode.
The speakers are connecting to a TV.
90