Page 1
English Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
English GENERAL POWER TOOL SAFETY WARNINGS b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust WARNING! Read all safety warnings and all mask, non-skid safety shoes, hard hat, or hearing instructions. Failure to follow the warnings and protection used for appropriate conditions will reduce instructions may result in electric shock, fire and/or personal injuries.
English into account the working conditions and the in loss of control. Breaking through or encountering hard work to be performed. Use of the power tool for materials such as re-bar may be hazardous as well. operations different from those intended could result Additional Safety Rules for Rotary in a hazardous situation.
English WARNING: Use of this tool can generate and/ power tool. Failure to follow the warnings and or disperse dust, which may cause serious and instructions may result in electric shock, fire and/ permanent respiratory or other injury. Always use or serious injury.
Page 5
1-800-4-D WALT (1-800-433-9258) or with a lower Watt hour (Wh) rating as compared to one visit our website www.dewalt.com. battery with a higher Watt hour rating. This increased quantity of three batteries with the lower Watt hour rating The RBRC®...
Page 6
English • DO NOT attempt to charge the battery pack with • Do not disassemble the charger; take it to an any chargers other than the ones in this manual. authorized service center when service or repair The charger and battery pack are specifically designed to is required.
English Wall Mounting 3. The completion of charge will be indicated by the red light remaining ON continuously. The battery pack is DCB107, DCB112, DCB113, DCB115, DCB118, DCB132 fully charged and may be used at this time or left in the These chargers are designed to be wall mountable or to charger.
Variable Speed Dial Positions For hammerdrilling horizontally with a heavy drill bit, place the side handle assembly at an angle of DWH053 / DWH050 / DeWALT Dust Extraction Model # approximately 20° to the tool for optimum control. Hollow Drill Bits 4.
English Fig. D To remove the battery pack from the tool, press the release button 9 and firmly pull the battery pack out of the tool handle. Insert it into the charger as described in the charger section of this manual. Fig.
English Electronic Speed and Impact Control (Fig. A) Your tool is equipped with a mode selector dial 4 select the mode appropriate to desired operation. The electronic speed and impact control allows the use of smaller drill bits without the risk of bit breakage, symbol Mode Application...
To minimize the risk of warranty coverage and warranty repair information, of eye injury, always wear ANSI Z87.1 approved eye visit www.dewalt.com or call 1-800-4-D WALT (1-800- protection when performing this. 433-9258). This warranty does not apply to accessories...
– no questions asked. TROUBLESHOOTING GUIDE BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns For assistance with your product, visit our website at www.dewalt.com for a list of service centers, or call D WALT at 1-800-4-D WALT (1-800-433-9258).