Table of Contents
Advertisement
Preparation
How to make a simple platform (For 4T-C70AL1H only)
To make such a simple platform, you need to use the packing box and the three foam blocks inside it: TOP-L,
TOP-C and TOP-R .
As shown in the following figure, remove the
1
plastic lock at the bottom of packing box.
Front
As shown in the following figure, remove the
2
three foam blocks TOP-L, TOP-C and TOP-R
on the top.
• Put the platform on the flat floor after you have made it.
• When installing the stand, you need to put the TV face
• The simple platform is just for temporary use. Do not apply
Front
1
As shown in Figure A, place it face down.
3
2
Insert the foam blocks TOP-L and TOP-R into
the right side and left side of the packing box
respectively ( as shown in Figure B ).
3
Insert the foam block TOP-C into the packing
box ( as shown in Figure B ). Now, a simple
platform is ready.
Figure A
Figure B
NOTE
down on the simple platform. Before that, put a shock pad
on the platform to protect the screen.
any load exceeding the weight of the LCD TV onto this
platform.
9
Advertisement
Table of Contents
