Sharp AQUOS 4T-C60AL1H Operation Manual page 41

Preparation
Attaching the stand unit
• When you attach the stand unit, put the TV on a flat surface.
• Before attaching (or detaching) the stand unit, unplug the AC power cord from the AC power outlet.
• Before performing work, spread cushioning over the surface on which you will be laying the TV.This will prevent it from
being damaged.
CAUTION
• Attach the stand unit in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand unit may result in the TV falling over.
How to install the stand unit
Put your TV on a soft cushion, and insert the stand unit
into the groove which has been preformed on the bottom
of the TV.
After assembling,fix them by six screws.
8
• When installing the stand unit, you need to put your TV on a
flat
• To detach the stand unit, perform the steps in reverse
order.
• The angle of the stand unit is not adjustable.
• A screwdriver is not supplied with this product.
• During installation, please be careful to avoid getting your
hand trapped between the TV bottom and the floor.
Screws
NOTE
surface. Before that, put a soft cushion on the surface.