Cancelling The Programme; End Of Programme; Standby Mode - Beko B5DT510446W User Manual

Switching the machine to pause mode:
Press the Start/Pause button to switch the
machine to pause mode. Pause symbol will
flash on the display.
Changing the programme selection after
programme has started:
The programme change is allowed when
the current programme is running unless
the Child Lock is enabled. This action will
cancel the current programme.
The selected programme starts
anew.
Changing the auxiliary function, speed
and temperature:
Depending on the step the programme has
reached, you can cancel or activate the aux-
iliary functions. See "Auxiliary function se-
lection"
You can also change the speed and tem-
perature settings. See ''Spin speed selec-
tion" and "Temperature selection".
The loading door will not open if the
water temperature in the machine
is high or the water level is above
the loading door baseline.

6.17 Cancelling the Programme

The programme is cancelled when pro-
gramme selection knob is turned to a dif-
ferent programme or machine is turned off
and on again using the programme selec-
tion knob.
If you turn the programme selection
knob when the Child Lock is en-
abled, the programme will not be
cancelled. You should cancel the
Child Lock first.
If you want to open the loading
door after you have cancelled the
programme but it is not possible to
open the loading door since the wa-
ter level in the machine is above the
loading door baseline, then turn the
Programme Selection knob to
Pump+Spin programme and drain
the water in the machine.

6.18 End of Programme

End symbol appears on the display when
the programme is completed.
If you do not press any button for 10
minutes, the machine will switch to OFF
mode. Display and all indicators are turned
off.
Completed programme steps will be dis-
played if you press any button.

6.19 Standby Mode

Your machine has the "Standby Mode" fea-
ture.
After turning the machine on with the On/
Off button, if no programme is started or no
other action is taken during the selection
phase, or if nothing is performed within ap-
proximately 2 minutes after the selected
programme is over, the machine automatic-
ally switches to energy saving mode. Fur-
thermore, if your product has a display that
shows the programme time, this display is
completely turned off. If you turn the pro-
gramme selection button or touch any but-
ton, the lights are illuminated and the
screen will turn on again. The choices you
make when exiting the energy saving state
may change.
Check your selections' accuracy before
starting the programme. Adjust your set-
tings again if necessary. This is not an er-
ror.
EN / 42