Gigabyte E152-ZE1 User Manual page 73

1u short depth amd epyc 7003 series server system

Table of Contents

Parameter

Firmware Image Properties

NIC Configuration

Blink LEDs

UEFI Driver

Adapter PBA

Device Name

Chip Type

PCI Device ID

PCI Address

Link Status

MAC Address

Virtual MAC Address

Description

Press [Enter] to configure advanced items.

Link Speed

– Allows for automatic link speed adjustment.

– Options available: Auto Negotiated, 10 Mbps Half, 10 Mbps Full,

100 Mbps Half, 100 Mbps Full. Default setting is Auto Negotiated.

Wake On LAN

– Enables power on of the system via LAN. Note that configuring

Wake on LAN in the operating system does not change the value of

this setting, but does override the behavior of Wake on LAN in OS

controlled power states.

– Options available: Enabled/Disabled. Default setting is Enabled.

Identifies the physical network port by blinking the associated LED.

Press the numeric keys to adjust desired values.

Displays the technical specifications for the Network Interface Controller.

- 75 -

BIOS Setup

Table of Contents