Gigabyte E152-ZE1 User Manual page 101

Parameter
Target Static Lane Select
Upper 32 bits
Target Static Lane Select
Lower 32 bits
Target Static Lane Select
ECC
Target Static Lane Value
Data Eye Type
Worst Case Margin
Granularity
Read Voltage Sweep Step
Size
Read Timing Sweep Step
Size
Write Voltage Sweep Step
Write Timing Sweep Step
Size
Description
This item is configurable when Target Static Lane Control is set to
Enabled.
This item is configurable when Target Static Lane Control is set to
Enabled.
This item is configurable when Target Static Lane Control is set to
Enabled.
This item is configurable when Target Static Lane Control is set to
Enabled.
This item determines which results are expected to be captured for Data Eye.
Options available: 1D Voltage Sweep, 1D Timing Sweep, 2D Full Data Eye,
Worst Case Margin Only. Default setting is Worst Case Margin Only.
Configures Worst Case Margin Granularity.
Options available: Per Chip Select, Per Nibble.
Default setting is Worst Case Margin Only.
Configures the step size for read Data Eye voltage sweep.
Options available: 1, 2, 4. Default setting is 2.
Configures the step size for read Data Eye timing sweep.
Options available: 1, 2, 4. Default setting is 1.
Configures the step size for write Data Eye voltage sweep.
Options available: 1, 2, 4. Default setting is 2.
Configures the step size for write Data Eye timing sweep.
Options available: 1, 2, 4. Default setting is 1.
- 103 - BIOS Setup