Gigabyte E152-ZE1 User Manual page 62

Parameter
PCI Bus Driver Version
GENZ_# Lanes Configuration
(Note1)
OCP3_1 Lanes Configuration
Note1)
GENZ_# I/O ROM
(Note1)
OCP3_1 I/O ROM
Note1)
PCIE_# Link Speed
(Note1)
OCP3_1 Link Speed
(Note1)
Onboard LAN Controller
Onboard LAN I/O ROM
PCI Devices Common Settings
Above 4G Decoding
SR-IOV Support
(Note1) This section is dependent on the available PCIe/OCP Slot.
(Note2) This section is dependent on the available LAN controller.
BIOS Setup
Description
Displays the PCI Bus Driver version information.
Change the PCIe lanes.
Options available: Disabled, Auto, x16, x8x8, x8x4x4, x4x4x8,
x4x4x4x4. Default setting is Auto.
When enabled, this setting will initialize the device expansion ROM
for the related PCI-E slot.
Options available: Enabled/Disabled. Default setting is Enabled.
Configure mezzanine PCIe max link speed.
Options available: Auto/Maximum/Gen1/Gen2/Gen3/Gen4.
Default setting is Auto.
Configure mezzanine OCP3 max link speed.
Options available: Auto/Maximum/Gen1/Gen2/Gen3/Gen4.
Default setting is Auto.
Enable/Disable the onboard LAN devices.
(Note2)
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable the onboard LAN devices, and initializes device
expansion ROM.
(Note2)
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable memory mapped I/O to 4GB or greater address
space (Above 4G Decoding).
Options available: Enabled/Disabled. Default setting is Enabled.
If the system has SR-IOV capable PCIe devices, this item Enable/
Disable Single Root IO Virtualization Support.
Options available: Enabled/Disabled. Default setting is Enabled.
- 64 -