TP-Link JetStream TL-SG3452X Installation Manual page 25

L2/l2+ managed switch

Hide thumbs Also See for JetStream TL-SG3452X:

Note: To manage your devices, Omada Software Controller needs to keep running on your computer.

1. Launch the Omada Software Controller on your PC. After the initiation process, the controller

automatically opens its web page. If not, click Launch a Browser to Manage the Network.

2. On the Omada Controller's web page, follow the wizard to complete the quick setup.

3. After the quick setup, the login page appears. Enter the username and password you have created

and click Log in. Then you can further configure the controller.

4. If you want to manage the devices reomotely, follow the next steps:

a. Make sure that Cloud Access is enabled on your controller and your controller has been bound

with your TP-Link ID. On the Omada Controller's web page, go to Settings > Cloud Access to

enable Cloud Access and bind your TP-Link ID. If you have set it up in the quick setup, skip this

step.

b. Launch a web browser and enter https://omada.tplinkcloud.com in the address bar. Enter your

TP-Link ID and password to log in. A list of controllers that have been bound with your TP-Link ID

will appear. Then you can click Launch to further configure the controller.

* Omada App

With the Omada app, you can also manage your controller at a local site or a remote site via your

mobile device.

For the detailed configurations, refer to the User Guide of the controller. The guide can be found on

the download center of our official website: https://www.tp-link.com/support/download/.

JetStream L2/L2+ Managed Switch

Configuration