Yamaha C215V Service Manual page 17

4. Horn Assembly
(Time required: About 3 minutes)
4-1 Remove the metal grille assembly. (See procedure 3-1)
4-2 Remove the eight (8) screws marked [140]. The horn
assembly can then be removed. (Photo 4)
4-3
Horn
4-3-1 Remove the two (2) hex head mach screw marked
[50c]. The horn can then be removed from the horn
assembly. (Photo 6)
[A]
Photo 5
4-4
Diaphragm Assembly
4-4-1 Remove the three (3) screws marked [A]. The
diaphragm assembly can then be removed from the
horn driver. (Photo 5, 7)
Diaphragm assembly
Horn
Horn driver
[50c]: Hex Head Mach Screw 1/4 x 5/8 inch (WJ356300)
Diaphragm assembly
Photo 7
CLUB Series
SPEAKER SYSTEM/
SUBWOOFER
Horn
Horn driver
[50c]
Photo 6
17