Table of Contents
Advertisement
Chapter 3 Pre-Dive
Sensor Calibration & Deploy and Retrieve
3. 4. Sensor Calibration (Check the Charter 6, Sensor Calibration Page 40)
3.4.1. Go to
General Setting
3.4.2. Select the
3.4.3. Follow the hit on FIFISH App step by step, first
Reboot ROV
3.4.4.
3.5. Deploy the ROV
•
ONLY pulling on the tether to deploy the submersible into the water.
•
Unlock the thrusters then start to dive.
NOTE
The depth shall greater than 2 meter (about 6 feet) for better operate experiences.
3.6. Retrieve
6.1.
LOCK
the thrusters
6.2.
STOP RECORDING
ONLY PULLING
6.3.
Sensor Icon
in FIFISH App, and Power ON/OFF RC if necessary
the video before closing the FIFISH App
on the tether to retrieve the submersible
Gyro-Acce
21
then
Mag
Advertisement
Table of Contents
