Advertisement
Assembly instructions | LK Webserver
User interface, functions
LK Webserver makes a simpler and more trans-
parent user interface to adjust system settings
via the room thermostat's menu and installation
parameters. The LK Webserver always begins
by searching for LK Room Temperature Control
ICS.2. If the webserver is only connected to the
LK Water Safety System, the tab Water can be
clicked on as no room temperature control is
found. The webserver is cloud-based and there
may be updates of the user interface and func-
tions that becomes directly available to the user,
see the latest manual at www.lksystems.se.
Menu
Log out from the account
Account
By clicking on the account icon, this allows a
change of name to the account and password on
the page below. Connect several webservers to the
account and remove a webserver from the account.
Account
Menu tab Thermo.
From the tab Thermo. this allows an overview of
the system's receivers and connected room ther-
mostats.
EN.33.C.190.1709
4 (7)
1
10
9 8
Basic functions
1. Menu tabs.
2. Update button. The webpage is automatically
updated as soon as a change is made to the
webpage or every tenth minute.
3. Device name, preselected as Receiver 1, i.e.
Receiver 1. Click on the name Receiver 1 and
rename the unit to a chosen name, for exam-
ple after its location or the part of the system
that it serves. Max. 15 characters.
4. Any alarm symbol can be shown. A thermo-
stat can also be shown. Click on the icon to
get information about the alarm.
5. Gear icon, clickable, to return to thermostat
settings.
6. Reduce/increase the desired room temperature.
7. Display of the set room temperature.
8. Display of the room temperature. If two tem-
peratures are displayed, the left is the room
temperature / the right is the floor temperature.
9. Heating symbol. If the heating symbol is
on, this means that the room thermostat has
switched on the heating.
10. Room thermostat, preselected as Thermostat.
Click on the name Thermostat and rename the
thermostat to a custom name, for example its
location i.e. room name/room designation.
Max 15 characters.
2
4
3
5
3
7 6
Advertisement
