Advertisement
4. Check your email for a new message, or the
spam folder, activate your account by click-
ing on the link in the email from noreply@
lkics.net. Your browser will open a new
window.
5. Login with your email address and chosen
password given in step 3, click on Login.
Login
6. Connect your account with the webserver by
indicating the name of the webserver printed
on the label (ab1234) and password on the
label. Click on Connect your LK Webserver.
Your account
7. Information on room temperature control
is in the tab Thermo. and System. The water
safety system is in the tab Water. Possible
settings are in the tab Network. For a de-
scription of each tab, see the section user
interface.
There is also an app for the webserver that
can be downloaded from Google play and
the Apple Appstore. The app is called
LK AtHome
Assembly instructions | LK Webserver
8. Reset the password on the login page.
Login, Reset password
The password can be reset with the Reset
password function. An email with instruc-
tions is sent to the registered email address.
9. If the webserver does not have internet ac-
cess, connect a computer using Windows to
your local network. Enter the address that is
printed on the webserver connected to the
router, see the image below. http://ab123,
then a dialogue box will appear for you to
enter the Username lk and Password that is
printed on the webserver.
Webserver label.
10. When the webpage is loaded, information is
shown for room temperature control in the
tab Thermo. and System. The water safety
system is in the tab Water. Possible settings
are in the tab Network. For a description of
each tab, see the section User interface.
EN.33.C.190.1709
3 (7)
Advertisement
