Martha Stewart Tristan Assembly Instructions

Dining chair

Important safety instructions:

Please read carefully all instructions before assembly.

For your safety and ease, assembly by two or more adults is recommended.

Keep instructions for future use.

Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.

Take out all parts and hardware from box.

( H1)x1 Short Bolts Ø5/16"*2"

( H2)x4 Long Bolts Ø5/16"*3-1/2"

( H3)x5

Lock Washers Ø5/16

Flat Washers Ø5/16

(H4)x5

( H5)x1

Allen Wrench Ø5/16

ASSEMBLY INSTRUCTIONS

Description: Tristan Dining Chair

Table of Contents

Do you have a question about the Tristan and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS Description: Tristan Dining Chair Important safety instructions: Please read carefully all instructions before assembly. For your safety and ease, assembly by two or more adults is recommended. Keep instructions for future use. Pre-assembly: Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Page 2 Step 2. Attach the front legs (P3) to the seat cushion (P2) as shown below. Step 3. Securely tighten all bolts with Allen wrench(H5). Turn the assembled chair to an upright position , make sure the chair is level, aligned properly . Assembly is complete. Failure to follow these instructions may cause the bolts to misalign during assembly.