JVC KD-R601 Instructions Manual page 15

Registering using "OPEN"
Preparation: Operate the device to turn on its
Bluetooth function.
1
Select "BT-PHONE" or "BT-AUDIO."
2
Select "NEW DEVICE."
3
Select "OPEN."
4
Enter a PIN (Personal Identification Number)
code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
– Some devices have their own PIN code. Enter
the specified PIN code to the unit.
1
Move to the next (or previous) number
position.
2
Select a number.
3 1
Repeat steps and
entering a PIN code.
4
Confirm the entry.
"OPEN.." flashes on the display.
2
until you finish
5
Use the Bluetooth device to search and
connect.
On the device to be connected, enter the same
PIN code you have just entered for this unit.
"CONNECTED" appears on the display.
Now connection is established and you can use the
device through the unit.
The device remains registered even after you
disconnect the device. Use "CONNECT" (or activate
"AUTO CNNCT") to connect the same device from
next time on. (See the following and page 26.)
Connecting a device
1
Select "BT-PHONE" or "BT-AUDIO."
2
Select "NEW DEVICE."
3
To search for available devices:
Select "SEARCH."
The unit searches and displays the list of the
available devices. If no available device is detected,
"UNFOUND" appears.
To connect a special device:
Select "SPECIAL."
The unit displays the list of the preset devices.
4
Select a device you want to connect.
EXTERNAL DEVICES
Continued on the next page
15